![]() We recommend placing it up high and also placing its antennas at 45 degrees (diagonally) or 0 degrees (straight out parallel to the floor), which will be more effective. Try to adjust the orientation of the antennas for maximum performance. ![]() Reduce the number of wireless clients and optimize the router’s position.Keep the router away from microwave ovens and other interference sources (refrigerators, ovens, Bluetooth devices, etc.).Wireless devices intermittently disconnect from the wireless network, while wired devices are still connected and working fine.įor possible solutions, please see the following: If not, please refer to Troubleshooting: Unstable connection on the TP-Link router Please check whether the internet is stable or not when the computer is connected to the router with the Ethernet cable. If it’s a modem/router, please contact your ISP to ensure the internet line is good.Ģ. If the internet is not stable, please contact your internet service provider to do some troubleshooting. Please be sure that when the computer is connected to your internet modem, the internet works fine without dropping. Turn on Networking & Wireless (or Wi-Fi Networking).1.Scroll to the bottom of the list, then tap System Services.Go to Settings > Privacy & Security (or Privacy) > Location Services.Select Networking & Wireless (or Wi-Fi Networking), then click Done.In the Privacy tab, select Location Services, then select Enable Location Services.Click the lock in the corner of the window, then enter your administrator password.Choose Apple menu > System Preferences, then click Security & Privacy. ![]() On your Mac with macOS Monterey or earlier Turn on "Networking and wireless", then click Done.Scroll to the bottom of the list of apps and services, then click the Details button next to System Services. ![]() Choose Apple menu > System Settings, then click Privacy & Security in the sidebar.Location Services helps to ensure your device can reliably see and connect to nearby devices, and that it performs well when using Wi-Fi or features that rely on Wi-Fi, such as AirPlay or AirDrop. Make sure your device has Location Services turned on for Wi-Fi networking, because regulations in each country or region define the Wi-Fi channels and wireless signal strength allowed there. Otherwise, devices that join your network will be more likely to encounter other networks that have the same name, and then try to connect to them automatically. Don't use common names or default names such as linksys, netgear, dlink, wireless or 2wire. Use a name that’s unique to your network.If your router is providing a Wi-Fi 6E network that isn’t using the same name for all bands, Apple devices that support Wi-Fi 6E will identify the network as having limited compatibility. Make sure all routers on your network use the same name for every band they support. If you give your 2.4 GHz, 5 GHz or 6 GHz bands different names, devices may not connect reliably to your network, to all routers on your network or to all available bands of your routers.It's also the name that nearby users will see on their device's list of available networks. The Wi-Fi network name, or SSID (service set identifier), is the name your network uses to advertise its presence to other devices. Set to a single, unique name (case-sensitive) for all bands
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |